防水F接头压着钳11
压线钳口模11
替换式手柄11
多功能压着钳11
重型端子压着钳11
垂直式压着钳11
棘轮压着钳11
四端压着钳11
六边形压接11
水晶头压着钳11
防水F接头压着钳11
压线钳口模11
替换式手柄11
多功能压着钳11
重型端子压着钳11
垂直式压着钳11
VDE电缆剪11
VDE电工刀11
VDE斜口钳11
VDE电工钳11
VDE尖嘴钳11
VDE套筒螺丝刀11
VDE剥线钳11
VDE剪刀11
VDE螺丝刀11
VDE套筒扳手11
VDE绝缘胶布11
VDE镊子11
VDE工具组11
VDE扳手11
모델: 8208크기: l 266mm x w 50mm × h 35mm제품 무게: 573g전압: ac220-240v / ac100-130v주파수: 50hz / 60hz출력 전력: 750w온도 범위: 100°c ~ 520°c온도 안정성: ±...
2024-01-12
19
모델: 8208
크기: l 266mm x w 50mm x h 35mm
제품 무게: 573g
전압: ac220-240v / ac100-130v
주파수: 50hz / 60hz
출력 전력: 750w
온도 범위: 100°c ~ 520°c
온도 안정성: ±2°c
공기 흐름: 120l/min(max.)
작동 온도: 0~40°c/32~104°f
Review the instructions for important safety information before using your Millermatic 211 welding machine. Ensure you are wearing OSHA-approved personal protective equipment during setup, maintenance and welding. A helmet with at least a shade 10 lens is recommended.
Pull the work lead out of the access hole on the front of the machine. Locate the control cable connection on the inside of the door, under the drive. Route the control cable through the access hole and connect the cable to the four-pin connection, twisting the collar to secure it in place.
Insert the MIG gun into the drive casting, making sure it is completely seated into the drive assembly. Tighten the threaded T-knob. For aluminum welding, instructions are provided for installing the optional Spoolmate 100 spool gun.
Route the work lead through the work clamp, connect, and tighten securely. Ensure the work cable is connected to the negative output terminal for solid wire with shielding gas.
Choose the appropriate gas (75/25 mix, 100% CO2, tri-mix for stainless steel, 100% argon for aluminum). Connect the gas hose to the regulator and machine, purge the gas cylinder, and secure connections.
Select the correct drive roll groove based on wire size. Place the wire spool on the shaft, thread the wire through the inlet guide and MIG gun liner, and adjust tension settings.
Plug in and power on the machine, avoiding extension cords if possible. Feed the wire through the gun, select the appropriate contact tip, and adjust the drive roll tension.
Use the parameter chart inside the door for initial settings. Utilize the Auto-Set feature on Millermatic 141 and 190 for mild steel and 75/25 gas, and the Advanced Auto-Set on Millermatic 211 for various materials and gases.
Use 100% argon gas and follow similar installation steps as the MIG gun. The spool gun holds the wire spool and automatically detects when the trigger is pulled, with no need for a spool gun switch.
我们的优势
坚持“以用户为中心、以人才为根本、努力实现你我共赢”的经营理念,以我们的诚信的态度和加倍的努力,与您共同发展。
多层审核,注重品质细节,对每一道生产工序负责,对每一位用户负责,竭诚为用户提供合格的、可靠的产品。
在生产、销售各方面不断学习,进一步提高公司的技术、质量和服务,保证每一位来我们公司的客户高兴而来,满意而归。
售前、售中、售后完整服务体系,保障客户的利益。贴心的客服24小时在线,随时为您服务,聆听客户反馈,及时跟进。
在线留言